Similar to a simple Rankine cycle, a basic organic Rankine cycle (ORC) consists of four processes: increasing pressure of the working fluid through a pump, high temperature heat addition through an evaporator, expansion of the high temperature as well as high pressure fluid through a turbine, and low temperature heat ...

The working principle of the organic Rankine cycle is the same as that of the Rankine cycle: the working fluid is pumped to a boiler where it is evaporated, passed through an expansion device (turbine, screw, scroll, or other expander), and then through a condenser heat exchanger where it is finally re-condensed.

The Rankine cycle operates in the following steps: 1-2-3 Isobaric Heat Transfer. High pressure liquid enters the boiler from the feed pump (1) and is heated to the saturation temperature (2). Further addition of energy causes evaporation of the liquid until it is fully converted to saturated steam (3).

The Rankine cycle is an idealized thermodynamic cycle describing the process by which certain heat engines, such as steam turbines or reciprocating steam engines, allow mechanical work to be extracted from a fluid as it moves between a heat source and heat sink.