Similar to a simple Rankine cycle, a basic organic Rankine cycle (ORC) consists of four processes: increasing pressure of the working fluid through a pump, high temperature heat addition through an evaporator, expansion of the high temperature as well as high pressure fluid through a turbine, and low temperature heat ...

The Rankine cycle, also called the Rankine vapor cycle, is a thermodynamic cycle that converts heat into mechanical energy. The Rankine cycle is name after William Johnson Macquorn Rankine, a 19th century Scottish engineer and physicist known for his research in the thermodynamic properties of steam.

The Rankine cycle operates in the following steps: 1-2-3 Isobaric Heat Transfer. High pressure liquid enters the boiler from the feed pump (1) and is heated to the saturation temperature (2). Further addition of energy causes evaporation of the liquid until it is fully converted to saturated steam (3).

A basic ORC consists of four main components: an evaporator, an expander, a condenser, and a pump. Figure 1 shows the simplest ORC configuration. As can be seen, liquid in saturated conditions (1) is pumped, increasing its pressure, into the evaporator (2) where it is evaporated by supplying energy in the form of heat.