An organic Rankine cycle (ORC), is fundamentally the same as a steam Rankine cycle; however, it uses a lower boiling point organic fluid to better match its operation to lower temperature heat sources. ORC systems can achieve better efficiencies than steam turbines for smaller systems (less than a few MW_e).

The Rankine cycle is named after William John Macquorn Rankine, a Scottish polymath professor at Glasgow University. Heat energy is supplied to the system via a boiler where the working fluid (typically water) is converted to a high-pressure gaseous state (steam) in order to turn a turbine.

The Rankine cycle or Rankine Vapor Cycle is the process widely used by power plants such as coal-fired power plants or nuclear reactors. In this mechanism, a fuel is used to produce heat within a boiler, converting water into steam which then expands through a turbine producing useful work.

thermal power plant works on principle of the Rankine Cycle shown in Fig. 2[5]The cycle consists of four processes: (1-2) Isentropic compression on pump; (2-3) Constant pressure heat addition in a boiler; (3-4) Isentropic expansion in a turbine; (4-1) Constant pressure heat rejection in a condenser.