×
The flue gas pre-drying of lignite produces a moisture rich dryer exhaust gas which can be further cooled to recover the waste heat and water vapor.
Missing: url? q= https://
People also ask
The system utilizes low-temperature heat sources as a supply of heat energy that flows through the evaporator and is then received by the working fluid to ...
Missing: url? https:// FPLPS- cycle_fig1_317306439
The simple process layout is shown in Figure 1 and consists of a waste heat recovery unit (WHRU), an expander, a desuperheater, a condenser and a working fluid ...
Missing: url? q= https:// FPLPS- integrated- cycle_fig1_317306439
Properly determining the required net positive suction head or subcooling for the pump is critical for the ORC system design and operation. Thus, this paper ...
Missing: url? https:// FPLPS- cycle_fig1_317306439
This paper recalls ORC principles, outlines challenges to be overcome (working fluids, small expanders design, performance map, heat exchangers integration, and ...
Missing: https:// FPLPS- cycle_fig1_317306439
The present paper analyzes the behavior of working fluids, such as water and some hydrocarbons and refrigerants in a Rankine cycle in different configurations.
In order to show you the most relevant results, we have omitted some entries very similar to the 6 already displayed. If you like, you can repeat the search with the omitted results included.