Organic Rankine Cycles (ORC) are systems that can effectively recover low-grade heat for electric power generation. For ORC to be a viable technology, it should operate safely and efficiently under variable operating conditions due to exogenous and operating specifications changes.

The Rankine cycle operates in the following steps: 1-2-3 Isobaric Heat Transfer. High pressure liquid enters the boiler from the feed pump (1) and is heated to the saturation temperature (2). Further addition of energy causes evaporation of the liquid until it is fully converted to saturated steam (3).

It is shown that by utilizing the full potential of screw expanders instead of turbines, it is possible to produce Organic Rankine Cycle (ORC) systems at these outputs, which can be installed for a cost in the range of $1500 to $2000 /kWe of net output.

This process was developed in 1859 by Scottish engineer William J.M. Rankine. This is a thermodynamic cycle which converts heat into mechanical energy—which usually gets transformed into electricity by electrical generation.