ORC: How it works In a typical ORC design, a thermal energy source feeds an evaporator to drive an expander or “reverse compressor”, which in turn generates the electricity. The provider of the heat can be natural, such as in the case of geothermal energy, or waste heat from any number of industrial waste heat sources.

An organic Rankine cycle (ORC), is fundamentally the same as a steam Rankine cycle; however, it uses a lower boiling point organic fluid to better match its operation to lower temperature heat sources. ORC systems can achieve better efficiencies than steam turbines for smaller systems (less than a few MW_e).

A basic ORC consists of four main components: an evaporator, an expander, a condenser, and a pump. Figure 1 shows the simplest ORC configuration. As can be seen, liquid in saturated conditions (1) is pumped, increasing its pressure, into the evaporator (2) where it is evaporated by supplying energy in the form of heat.

The efficiency of current high temperature Organic Rankine Cycles does not exceed 24%. Typical steam Rankine cycles show a thermal efficiency higher than 30%, but with a more complex cycle design (in terms of number of components or size).